Mobile module    4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbpsStatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCIDSMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPPBlack/White listOperator black/white listBand managementBand lock, Used band status displayAPNAuto APNBridgeDirect connection (bridge) between mobile ISP and device on LANPassthroughRouter assigns its mobile WAN IP address to another device on LANMultiple PDN (optional)Possibility to use different PDNs for multiple network access and services (not available in standard FW)WIRELESS

modeIEEE 802.11b/g/n, Access Point (AP), Station (STA)WiFi securityWPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separationSSIDSSID stealth mode and access control based on MAC addressWiFi usersUp to 50 simultaneous connections

HotspotCaptive portal (Hotspot), internal/external Radius server, built in customizable landing pageETHERNETWAN1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIXLAN1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIXNETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)

protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL)VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rulesDHCPStatic and dynamic IP allocation, DHCP Relay, RelaydQoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manually

backupVRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic FailoverLoad balancingBalance your internet traffic over multiple WAN connectionsSSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)SECURITYAuthenticationPre-shared key, digital certificates, X.509 certificatesFirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-TAttack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)VLANPort and tag based VLAN separationMobile quota controlSet up custom data limits for the SIM cardWEB filterBlacklist for blocking out unwanted websites, whitelist for specifying allowed sites onlyAccess controlFlexible access control of TCP, UDP, ICMP packets, MAC address filterVPNOpenVPNMultiple clients and server can be running simultaneously, 12 encryption methodsOpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBCIPsecIKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)GREGRE tunnelPPTP, L2TPClient/Server services can run simultaneouslyStunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' codeSSTPSSTP client instance supportZeroTierZeroTier VPNWireGuardWireGuard VPN client and server supportMODBUSMODBUS TCP SLAVEID filteringRespond to one ID in range [1;255] or anyAllow Remote AccessAllow access through WANCustom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionalityMODBUS TCP MASTERSupported functions01, 02, 03, 04, 05, 06, 15, 16Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)MODBUS DATA TO SERVERProtocolHTTP(S), MQTT, Azure MQTTMQTT GATEWAYMQTT gatewayAllows sending commands and receiving data from MODBUS Master through MQTT brokerMONITORING & MANAGEMENTWEB UIHTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel logFOTAFirmware update from sever, automatic notificationSSHSSH (v1, v2)SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GETCallReboot, Status, WiFi on/off, Mobile data on/off, Output on/offTR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystemMQTTMQTT Broker, MQTT publisherSNMPSNMP (v1, v2, v3), SNMP trapJSON-RPCManagement API over HTTP/HTTPSMODBUSMODBUS TCP status/controlRMSTeltonika Remote Management System (RMS)IoT PLATFORMSCloud of ThingsAllows monitoring of: Device data, Mobile data,

info, AvailabilityThingWorxAllows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile

TypeCumulocityAllows monitoring of: Device

, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IPAzure IoT HubCan send device IP, Number of bytes send/received/ 3G connection state,

link state, IMEI, ICCID,

, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub serverSYSTEM CHARACTERISTICS

Mediatek MIPS 24Kc 580 MHz

128 MB, DDR2FLASH storage16 MB, SPI FlashFIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup, restore pointFOTAUpdate FW/configuration from serverRMSUpdate FW/configuration for multiple devicesKeep settingsUpdate FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with built environment providedINPUT/OUTPUTInput1 x Digital input, 0 - 5 V detected as logic low, 8 - 30 V detected as logic highOutput1 x Digital open collector output, max output 30 V, 300 mAEventsSMS, EMAIL, RMSPOWERConnector4 pin industrial DC power socketInput voltage range9 – 30 VDC, reverse polarity protection, surge protection >33 VDC 10us maxPoE (passive)Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3btPower consumption< 6.5 W MaxPHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)Ethernet2 x RJ45 ports, 10/100 MbpsI/O’s1 x Digital Input, 1 x Digital Output on 4 pin power connectorStatus LEDs3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LEDSIM1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holderPower1 x 4 pin DC connectorAntennas2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectorsResetReboot/Factory reset buttonPHYSICAL SPECIFICATIONCasing materialAluminium housing with DIN rail mounting option, plastic panels

(W x H x D)83 x 25 x 74 mm

125 gMounting optionsBottom and sideways DIN rail mounting slotsOPERATING ENVIRONMENTOperating temperature-40 °C to 75 °COperating humidity10% to 90% non-condensingIngress Protection RatingIP30REGULATORY & TYPE APPROVALSRegulatoryCE/RED, UKCA, CBEMI IMMUNITYStandardsEN 301 489-1 V2.2.3 EN 301 489-17 V3.2.4 Final draft EN 301 489-52 V1.2.0 EN 55032:2015+A1:2020 EN 55035:2017+A11:2020 EN 61000-3-3:2013+A1:2019 EN IEC 61000-3-2:2019ESDEN 61000-4-2:2009Radiated ImmunityEN 61000-4-3:2020EFTEN 61000-4-4:2012Surge Immunity (AC Mains Power Port)EN 61000-4-5:2014+A1:2017Conducted ImmunityEN 61000-4-6:2014DIPEN IEC 61000-4-11:2020RFStandardsEN 300 328 V2.2.2, EN 301 511 V12.5.1, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1SAFETYStandardsEN IEC 62311:2020, EN 50665:2017, EN IEC 62368-1:2020+A11:2020, IEC 62368-1:2018