5 Gigabit portsDiscover APs automaticallyMaximum managed number of APs up to 512, default setting is 256Modify the description of APs to identify locationUnified management of APs SSID, channel, security, output power, client limitThe CW1000 is an access controller to configure, manage and monitor APs from IP-COM. Adopting IP-COMs latest software system, the CW1000 can manage up to 512 wireless Access Points and monitor 3000 online clients simultaneously. When you deploy it in the network, you just connect it to the core switch and you can manage all online APs deployment location, SSID, channel, security, output power and client limits in a single place. It is an ideal solution for hotels, schools etc.Easy to DeploThe CW1000 can be deployed in branch network mode, you just connect the CW1000 to the core switch without changing your network topology, then you can manage all the APs in the newtork.Manage 512 APs SimultaneouslyAdopting IP-COMs latest software system, the CW1000 can manage up to 512 wireless Access Points and monitor 3000 online clients simultaneously.Discover APs AutomaticallyAfter the APs are connected to the network, the APs will be detected and managed by access controller. Then, you can find all the APs listed on the access controller.SSID to VLAN TaggingThe CW1000 can define multiple SSIDs for the AP and tag VLAN IDs to each SSID to establish different Internet access rights.Centralized ManagementThe CW1000 integrates abundant wireless management features such as APs description, SSID, channel, security, output power, client limit and also supports abundant maintain features like APs/clients online status monitoring, batch upgrade/reboot/reset of APs, AP failure alarm, and AP traffic alarm. All these functions make it easy to manage APs in a single location.